Overview
Spec Sheet
Shipping/Freight
Spec Sheet
**General Specifications**
  • Model: S25
  • Manufacturer: Clark
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
**Engine**
  • Engine Type: Diesel or LPG
  • Number of Cylinders: 4
**Dimensions**
  • Overall Length: Approximately 144 inches
  • Overall Width: Approximately 46 inches
  • Overall Height to Overhead Guard: Approximately 83 inches
  • Turning Radius: Approximately 88 inches
  • Wheelbase: Approximately 63 inches
  • Ground Clearance: Approximately 4.5 inches
**Capacity**
  • Load Capacity: 5,000 lbs
**Performance**
  • Travel Speed: Up to 11 mph
  • Lift Speed: Up to 100 feet per minute (laden)
  • Lowering Speed: Approximately 100 feet per minute (laden)
**Tires**
  • Tire Type: Pneumatic
  • Front Tire Size: 7.00-12
  • Rear Tire Size: 6.00-9
**Fuel Tank**
  • Fuel Tank Capacity (diesel): Approximately 15.8 gallons
  • Fuel Tank Capacity (LP gas): Approximately 33.5 lbs
**Brakes**
  • Service Brake: Hydraulic
  • Parking Brake: Mechanical
**Transmission**
  • Transmission Type: Powershift
  • Number of Forward Speeds: 1
  • Number of Reverse Speeds: 1
**Forks**
  • Fork Length: Varies
  • Fork Width: Approximately 4 inches
  • Fork Thickness: Approximately 1.6 inches
**Hydraulics**
  • Hydraulic System Pressure: Approximately 2,750 psi
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

2020 Clark S25

pneumatic tire 4 wheel sit down lp gas

$27,723 USD
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Brandon McClendon

ADDRESS
Burwell Material Handling
2223 West 12th Street
Sioux FallsSouth Dakota 57104
ATTRIBUTES
STOCK #:
EQ0001498
YEAR:
2020
Manufacturer:
MODEL #:
CAPACITY:
5000
FUEL:
MAST TYPE:
SERIAL #:
S232L-2316-12030VN
HOUR METER:
30.7
UNIT LOCATION:
South Dakota [57104]
DESCRIPTION:
POST DATE:
3/4/2026
**General Specifications**
  • Model: S25
  • Manufacturer: Clark
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
**Engine**
  • Engine Type: Diesel or LPG
  • Number of Cylinders: 4
**Dimensions**
  • Overall Length: Approximately 144 inches
  • Overall Width: Approximately 46 inches
  • Overall Height to Overhead Guard: Approximately 83 inches
  • Turning Radius: Approximately 88 inches
  • Wheelbase: Approximately 63 inches
  • Ground Clearance: Approximately 4.5 inches
**Capacity**
  • Load Capacity: 5,000 lbs
**Performance**
  • Travel Speed: Up to 11 mph
  • Lift Speed: Up to 100 feet per minute (laden)
  • Lowering Speed: Approximately 100 feet per minute (laden)
**Tires**
  • Tire Type: Pneumatic
  • Front Tire Size: 7.00-12
  • Rear Tire Size: 6.00-9
**Fuel Tank**
  • Fuel Tank Capacity (diesel): Approximately 15.8 gallons
  • Fuel Tank Capacity (LP gas): Approximately 33.5 lbs
**Brakes**
  • Service Brake: Hydraulic
  • Parking Brake: Mechanical
**Transmission**
  • Transmission Type: Powershift
  • Number of Forward Speeds: 1
  • Number of Reverse Speeds: 1
**Forks**
  • Fork Length: Varies
  • Fork Width: Approximately 4 inches
  • Fork Thickness: Approximately 1.6 inches
**Hydraulics**
  • Hydraulic System Pressure: Approximately 2,750 psi
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
Feedback
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following